Mimicking the case of rigid robot arms, the set-point regulation problem for manipulators with flexible links moving under gravity can be solved by either model-based compensation or PID control. The former cannot be applied if an unknown payload is present or when model parameters are poorly estimated, while the latter requires fine and lengthy tuning of gains in order to achieve good performance on the whole workspace. Moreover, no global convergence proof has been yet given for PID control of flexible robot arms. In this paper, a simple iterative scheme is proposed for generating exact gravity compensation at the desired set-point, without the knowledge of rigid or flexible dynamic model terms. The control law starts with a PD action on the error at the joint level, updating at discrete instants an additional feedforward term. Global convergence of the scheme is proved under a mild condition on the proportional gain and a structural property on the arm stiffness, which is usually satisfied in practice. The proposed learning scheme is also extended to the direct control of the end-effector (tip) position. Experimental results are presented for a two-link robot with a flexible forearm moving on a tilted plane

DE LUCA, A., Panzieri, S. (1994). An iterative scheme for learning gravity compensation in flexible robot arms. AUTOMATICA, 30(6), 993-1002 [10.1016/0005-1098(94)90192-9].

An iterative scheme for learning gravity compensation in flexible robot arms

PANZIERI, Stefano
1994-01-01

Abstract

Mimicking the case of rigid robot arms, the set-point regulation problem for manipulators with flexible links moving under gravity can be solved by either model-based compensation or PID control. The former cannot be applied if an unknown payload is present or when model parameters are poorly estimated, while the latter requires fine and lengthy tuning of gains in order to achieve good performance on the whole workspace. Moreover, no global convergence proof has been yet given for PID control of flexible robot arms. In this paper, a simple iterative scheme is proposed for generating exact gravity compensation at the desired set-point, without the knowledge of rigid or flexible dynamic model terms. The control law starts with a PD action on the error at the joint level, updating at discrete instants an additional feedforward term. Global convergence of the scheme is proved under a mild condition on the proportional gain and a structural property on the arm stiffness, which is usually satisfied in practice. The proposed learning scheme is also extended to the direct control of the end-effector (tip) position. Experimental results are presented for a two-link robot with a flexible forearm moving on a tilted plane
1994
DE LUCA, A., Panzieri, S. (1994). An iterative scheme for learning gravity compensation in flexible robot arms. AUTOMATICA, 30(6), 993-1002 [10.1016/0005-1098(94)90192-9].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11590/131836
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 38
  • ???jsp.display-item.citation.isi??? 23
social impact