This paper proposes a kinematic model and an inertial localization system architecture for a riser inspecting robot. The robot scrolls outside the catenary riser, used for underwater petroleum exploration, and is designed to perform several nondestructive tests. It can also be used to reconstruct the riser profile. Here, a realistic simulation model of robot kinematics and its environment is proposed, using different sources of data: oil platform characteristics, riser static configuration, sea currents and waves, vortex-induced vibrations, and instrumentation model. A dynamic finite element model of the riser generates a nominal riser profile. When the robot kinematic model virtually scrolls the simulated riser profile, a robot kinematic pattern is calculated. This pattern feeds error models of a strapdown inertial measurement unit (IMU) and of a depth sensor. A Kalman filter fuses the simulated accelerometers data with simulated external measurements. Along the riser vertical part, the estimated localization error between the simulated nominal and Kalman filter reconstructed robot paths was about 2 m. When the robot model approaches the seabed it assumes a more horizontal trajectory and the localization error increases significantly.

Luporini Menegaldo, L., Panzieri, S., Neves, C. (2012). Reconstruction of Riser Profiles by an Underwater Robot Using Inertial Navigation. JOURNAL OF ROBOTICS, 2012 [10.1155/2012/638394].

Reconstruction of Riser Profiles by an Underwater Robot Using Inertial Navigation

PANZIERI, Stefano;
2012-01-01

Abstract

This paper proposes a kinematic model and an inertial localization system architecture for a riser inspecting robot. The robot scrolls outside the catenary riser, used for underwater petroleum exploration, and is designed to perform several nondestructive tests. It can also be used to reconstruct the riser profile. Here, a realistic simulation model of robot kinematics and its environment is proposed, using different sources of data: oil platform characteristics, riser static configuration, sea currents and waves, vortex-induced vibrations, and instrumentation model. A dynamic finite element model of the riser generates a nominal riser profile. When the robot kinematic model virtually scrolls the simulated riser profile, a robot kinematic pattern is calculated. This pattern feeds error models of a strapdown inertial measurement unit (IMU) and of a depth sensor. A Kalman filter fuses the simulated accelerometers data with simulated external measurements. Along the riser vertical part, the estimated localization error between the simulated nominal and Kalman filter reconstructed robot paths was about 2 m. When the robot model approaches the seabed it assumes a more horizontal trajectory and the localization error increases significantly.
2012
Luporini Menegaldo, L., Panzieri, S., Neves, C. (2012). Reconstruction of Riser Profiles by an Underwater Robot Using Inertial Navigation. JOURNAL OF ROBOTICS, 2012 [10.1155/2012/638394].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11590/139291
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact