A procedure to determine the shear strength characteristic value (Vrck) is presented and applied to two existing RC beams extracted from an old structure built in Italy in the early 1900s. Several nondestructive tests (NDT) and destructive tests (DT) were performed, and the experimental outcomes show a great variability of the compressive strength in the same beam. For this reason, Vrck values were calculated for each beam, assuming different knowledge levels about the concrete compressive strength. The procedure results are compared to those obtained by applying a traditional Bayesian updating procedure, where the updating basic variables (represented by the concrete strength) was determined by using indirect measures of strength as a prior information.

Forte, A., Santini, S., Fiorentino, G., Lavorato, D., Bergami, A.V., Nuti, C. (2018). Influence of materials knowledge level on the assessment of the shear strength characteristic value of existing RC beams. In Proceedings of the 12th fib International PhD Symposium in Civil Engineering (pp.979-986). Czech Technical University.

Influence of materials knowledge level on the assessment of the shear strength characteristic value of existing RC beams

Forte, Angelo;Santini, Silvia;Fiorentino, Gabriele;Lavorato, Davide;Bergami, Alessandro Vittorio;Nuti, Camillo
2018-01-01

Abstract

A procedure to determine the shear strength characteristic value (Vrck) is presented and applied to two existing RC beams extracted from an old structure built in Italy in the early 1900s. Several nondestructive tests (NDT) and destructive tests (DT) were performed, and the experimental outcomes show a great variability of the compressive strength in the same beam. For this reason, Vrck values were calculated for each beam, assuming different knowledge levels about the concrete compressive strength. The procedure results are compared to those obtained by applying a traditional Bayesian updating procedure, where the updating basic variables (represented by the concrete strength) was determined by using indirect measures of strength as a prior information.
2018
9788001064016
Forte, A., Santini, S., Fiorentino, G., Lavorato, D., Bergami, A.V., Nuti, C. (2018). Influence of materials knowledge level on the assessment of the shear strength characteristic value of existing RC beams. In Proceedings of the 12th fib International PhD Symposium in Civil Engineering (pp.979-986). Czech Technical University.
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11590/342495
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 12
  • ???jsp.display-item.citation.isi??? ND
social impact