Present paper deals with modelling, production and characterization of HVOF PVD (WC-Co and TiN or CrN, respectively) duplex coatings deposited on Ti-6Al-4V substrate for application in automotive industry. As a preliminary analysis, an analytical study of the contact stress distribution under spherical indenter in both coated and uncoated systems, and a finite element evaluation of residual stresses were performed: results showed that the presence of an interlayer with intermediate hardness and stiffness (such as the WC-Co coating) plays a fundamental role in the improvement of the load carrying capacity. Starting from the results of simulations, morphological and compositional characterization of the coatings were performed using SEM and AFM techniques. Mechanical properties were investigated by micro indentation techniques and composite hardness modelling; toughness of the system was qualitatively analysed by Rockwell C indentation. Wear rate of the coatings was measured by an implemented rotating wheel method. Results show higher superficial composite hardness, toughness, adhesion and lower wear rate, in comparison with the simple monolayer system. (c) 2005 Elsevier B.V. All rights reserved.

Bemporad, E., Sebastiani, M., De Felicis, D., Carassiti, F., Valle, R., Casadei, F. (2006). Production and characterization of duplex coatings (HVOF and PVD) on Ti-6Al-4V substrate. THIN SOLID FILMS, 515(1), 186-194 [10.1016/j.tsf.2005.12.058].

Production and characterization of duplex coatings (HVOF and PVD) on Ti-6Al-4V substrate

BEMPORAD, Edoardo;SEBASTIANI, MARCO;
2006

Abstract

Present paper deals with modelling, production and characterization of HVOF PVD (WC-Co and TiN or CrN, respectively) duplex coatings deposited on Ti-6Al-4V substrate for application in automotive industry. As a preliminary analysis, an analytical study of the contact stress distribution under spherical indenter in both coated and uncoated systems, and a finite element evaluation of residual stresses were performed: results showed that the presence of an interlayer with intermediate hardness and stiffness (such as the WC-Co coating) plays a fundamental role in the improvement of the load carrying capacity. Starting from the results of simulations, morphological and compositional characterization of the coatings were performed using SEM and AFM techniques. Mechanical properties were investigated by micro indentation techniques and composite hardness modelling; toughness of the system was qualitatively analysed by Rockwell C indentation. Wear rate of the coatings was measured by an implemented rotating wheel method. Results show higher superficial composite hardness, toughness, adhesion and lower wear rate, in comparison with the simple monolayer system. (c) 2005 Elsevier B.V. All rights reserved.
Bemporad, E., Sebastiani, M., De Felicis, D., Carassiti, F., Valle, R., Casadei, F. (2006). Production and characterization of duplex coatings (HVOF and PVD) on Ti-6Al-4V substrate. THIN SOLID FILMS, 515(1), 186-194 [10.1016/j.tsf.2005.12.058].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11590/131511
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 39
  • ???jsp.display-item.citation.isi??? 37
social impact