This paper deals with designing and sizing of a Multiple-Input Power Electronic Converter (MIPEC) to be used in an electric vehicle propulsion system that includes a fuel cell (FC) generator and a combined storage unit. The combined storage unit is composed by an ultracapacitors tank (UC) and a battery unit (BU). MIPEC is responsible for power-flow management on-board the vehicle for each mode of operation. Specifications for MIPEC designing come out from many considerations concerning traction drive and reference driving cycle, on-board power source and storage unit characteristics. However, to date sizing and configuration of both storage units and on-board generators are directly related to traction drive and driving profile (i.e. vehicle performances and characteristics) and no relation with power electronic interface is considered during preliminary design. Then, power electronic interface is selected in order to fit traction drive requirements with power source and storage unit characteristics; as a consequence converter mode of operation lacks of optimization, as well dynamic behavior and efficiency cannot be maximized. In this paper, MIPEC design and power source and storage unit selection are achieved at the same project stage according to traction drive requirements. Experimental results on 60kW power electronic interface are presented.

Solero, L., Lidozzi, A., Pomilio, J.A. (2005). Design of Multiple-Input Power Converter for Hybrid Vehicles. IEEE TRANSACTIONS ON POWER ELECTRONICS, 20(5), 107-116 [10.1109/TPEL.2005.854020].

Design of Multiple-Input Power Converter for Hybrid Vehicles

SOLERO, LUCA;
2005-01-01

Abstract

This paper deals with designing and sizing of a Multiple-Input Power Electronic Converter (MIPEC) to be used in an electric vehicle propulsion system that includes a fuel cell (FC) generator and a combined storage unit. The combined storage unit is composed by an ultracapacitors tank (UC) and a battery unit (BU). MIPEC is responsible for power-flow management on-board the vehicle for each mode of operation. Specifications for MIPEC designing come out from many considerations concerning traction drive and reference driving cycle, on-board power source and storage unit characteristics. However, to date sizing and configuration of both storage units and on-board generators are directly related to traction drive and driving profile (i.e. vehicle performances and characteristics) and no relation with power electronic interface is considered during preliminary design. Then, power electronic interface is selected in order to fit traction drive requirements with power source and storage unit characteristics; as a consequence converter mode of operation lacks of optimization, as well dynamic behavior and efficiency cannot be maximized. In this paper, MIPEC design and power source and storage unit selection are achieved at the same project stage according to traction drive requirements. Experimental results on 60kW power electronic interface are presented.
2005
Solero, L., Lidozzi, A., Pomilio, J.A. (2005). Design of Multiple-Input Power Converter for Hybrid Vehicles. IEEE TRANSACTIONS ON POWER ELECTRONICS, 20(5), 107-116 [10.1109/TPEL.2005.854020].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11590/159127
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 396
  • ???jsp.display-item.citation.isi??? 307
social impact