Fluorescent lithium fluoride detectors for X-ray projection imaging F. Bonfigli, M.A. Vincenti, R.M. Montereali ENEA, C.R. Frascati, Photonics Micro- and Nano-structures Lab., UTAPRAD-MNF, Via E. Fermi 45, 00044 Frascati (Rome), Italy E. Nichelatti ENEA, C.R. Casaccia, Optical Devices Laboratory, UTTMAT-OTT, Via Anguillarese 301, 00123 S. Maria di Galeria, Rome, Italy F. Somma, S. Heidari Bateni Università degli Studi Roma Tre, Dip. di Fisica E. Amaldi, Via della Vasca Navale 84, 00146 Rome, Italy A. Cecilia, T. Baumbach Institute for Photon Science and Synchrotron Radiation (IPS)/ANKA, Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany. Abstract The possibility of detecting high quality images of materials, devices and biological samples in the soft and hard X-ray spectral ranges with high spatial resolution and contrast and by using simple exposing configuration is a topical task nowadays. For this purpose, we propose the use of versatile imaging detectors based on the radiation sensitivity of lithium fluoride (LiF) to extreme ultraviolet, soft and hard X-rays [1, 2]. X-rays generate stable point defects in LiF, known as colour centres (CCs), which emit broad-band photoluminescence at visible wavelengths under optical pumping. The high dynamic response of the material to the received dose together with the atomic scale of the CCs make LiF plates, in form of thin films or crystals, extremely attractive as high-spatial-resolution radiation-imaging detectors both in absorption and phase contrast imaging configurations [1, 3]. The latent images are subsequently read by using optical fluorescence microscopes, which in the case of advanced techniques can reach spatial resolutions well below 100 nm [4]. We present lensless imaging experiments in projection mode at the TOPO–TOMO beamline of the synchrotron light source Anka (Karlsruhe, Germany) by using LiF crystals and thin films irradiated in the energy range 6–40 keV. Stable fluorescent images were formed in LiF detectors by scattered X-rays after an object had been positioned between the X-ray source and the detectors. The object used in this work is the commercial test pattern X500-200-30 (Xradia, Pleasanton, CA, USA) consisting of a gold mask (thickness 3 m) deposited on a (500500) μm2 Si3N4 window (thickness 330 nm). The LiF detectors were crystals and 1 m thick polycrystalline films deposited on glass substrates. To imprint the X-ray image of the sample on the LiF detectors, the test pattern was irradiated with several exposure times between 1 s and 60 s. The X-ray micro-radiographies were optically read with a confocal laser scanning microscope (CLSM, Nikon Eclipse 80i-C1) operating in fluorescence mode. It is worth pointing out that a 1 m LiF film was able to store high-quality and well contrasted fluorescence images of the test pattern, although X-ray attenuation length in LiF varies between 0.02-12 mm for X-ray energies in the investigated range. The stored images show edge-enhancement effects that are ascribable to diffraction processes occurring during the X-ray beam propagation after its interaction with the sample. A computer simulation was performed to calculate the incoming X-ray intensity distribution across the detector. A fairly good agreement with experimental data evidences a linear optical fluorescence response of LiF-film based detectors under the investigated conditions. This linear behaviour has been confirmed by measurements of the PL signals of F2 and F3+ CCs detected with a CLSM system for several X-ray irradiation times. Further investigations are in progress to study the exploitation of solid-state LiF detectors for X-ray lensless projection imaging experiments and applications. References [1] G. Baldacchini, F. Bonfigli, A. Faenov, F. Flora, R.M. Montereali, A. Pace, T. Pikuz, L. Reale, J. Nanoscience and Nanotechnology 3, 6 483-486, (2003). [2] S. Almaviva, F. Bonfigli, I. Franzini, A. Lai, R.M. Montereali, D. Pelliccia, A. Cedola, S. Lagomarsino, Appl. Phys. Lett. 89, 54102, (2006). [3] F. Bonfigli, A. Cecilia, S. Heidari Bateni, E. Nichelatti, D. Pelliccia, F. Somma, P. Vagovic, M.A. Vincenti, T. Baumbach and R.M. Montereali, Radiation Measurements 56, 277-280, (2013). [4] A. Ustione, A. Cricenti, F. Bonfigli, F. Flora, A. Lai, T. Marolo, R.M. Montereali, G. Baldacchini, A. Faenov, T. Pikuz, L. Reale, Appl. Phys. Lett. 88, 141107 (2006).
F., B., M. A., V., R. M. Montereali E., N., Somma, F., S., H.B., A., C., et al. (2014). Fluorescent Lithium Fluoride Detectors for X-Ray Projection Imaging.
Fluorescent Lithium Fluoride Detectors for X-Ray Projection Imaging
SOMMA, Fabrizia;
2014-01-01
Abstract
Fluorescent lithium fluoride detectors for X-ray projection imaging F. Bonfigli, M.A. Vincenti, R.M. Montereali ENEA, C.R. Frascati, Photonics Micro- and Nano-structures Lab., UTAPRAD-MNF, Via E. Fermi 45, 00044 Frascati (Rome), Italy E. Nichelatti ENEA, C.R. Casaccia, Optical Devices Laboratory, UTTMAT-OTT, Via Anguillarese 301, 00123 S. Maria di Galeria, Rome, Italy F. Somma, S. Heidari Bateni Università degli Studi Roma Tre, Dip. di Fisica E. Amaldi, Via della Vasca Navale 84, 00146 Rome, Italy A. Cecilia, T. Baumbach Institute for Photon Science and Synchrotron Radiation (IPS)/ANKA, Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany. Abstract The possibility of detecting high quality images of materials, devices and biological samples in the soft and hard X-ray spectral ranges with high spatial resolution and contrast and by using simple exposing configuration is a topical task nowadays. For this purpose, we propose the use of versatile imaging detectors based on the radiation sensitivity of lithium fluoride (LiF) to extreme ultraviolet, soft and hard X-rays [1, 2]. X-rays generate stable point defects in LiF, known as colour centres (CCs), which emit broad-band photoluminescence at visible wavelengths under optical pumping. The high dynamic response of the material to the received dose together with the atomic scale of the CCs make LiF plates, in form of thin films or crystals, extremely attractive as high-spatial-resolution radiation-imaging detectors both in absorption and phase contrast imaging configurations [1, 3]. The latent images are subsequently read by using optical fluorescence microscopes, which in the case of advanced techniques can reach spatial resolutions well below 100 nm [4]. We present lensless imaging experiments in projection mode at the TOPO–TOMO beamline of the synchrotron light source Anka (Karlsruhe, Germany) by using LiF crystals and thin films irradiated in the energy range 6–40 keV. Stable fluorescent images were formed in LiF detectors by scattered X-rays after an object had been positioned between the X-ray source and the detectors. The object used in this work is the commercial test pattern X500-200-30 (Xradia, Pleasanton, CA, USA) consisting of a gold mask (thickness 3 m) deposited on a (500500) μm2 Si3N4 window (thickness 330 nm). The LiF detectors were crystals and 1 m thick polycrystalline films deposited on glass substrates. To imprint the X-ray image of the sample on the LiF detectors, the test pattern was irradiated with several exposure times between 1 s and 60 s. The X-ray micro-radiographies were optically read with a confocal laser scanning microscope (CLSM, Nikon Eclipse 80i-C1) operating in fluorescence mode. It is worth pointing out that a 1 m LiF film was able to store high-quality and well contrasted fluorescence images of the test pattern, although X-ray attenuation length in LiF varies between 0.02-12 mm for X-ray energies in the investigated range. The stored images show edge-enhancement effects that are ascribable to diffraction processes occurring during the X-ray beam propagation after its interaction with the sample. A computer simulation was performed to calculate the incoming X-ray intensity distribution across the detector. A fairly good agreement with experimental data evidences a linear optical fluorescence response of LiF-film based detectors under the investigated conditions. This linear behaviour has been confirmed by measurements of the PL signals of F2 and F3+ CCs detected with a CLSM system for several X-ray irradiation times. Further investigations are in progress to study the exploitation of solid-state LiF detectors for X-ray lensless projection imaging experiments and applications. References [1] G. Baldacchini, F. Bonfigli, A. Faenov, F. Flora, R.M. Montereali, A. Pace, T. Pikuz, L. Reale, J. Nanoscience and Nanotechnology 3, 6 483-486, (2003). [2] S. Almaviva, F. Bonfigli, I. Franzini, A. Lai, R.M. Montereali, D. Pelliccia, A. Cedola, S. Lagomarsino, Appl. Phys. Lett. 89, 54102, (2006). [3] F. Bonfigli, A. Cecilia, S. Heidari Bateni, E. Nichelatti, D. Pelliccia, F. Somma, P. Vagovic, M.A. Vincenti, T. Baumbach and R.M. Montereali, Radiation Measurements 56, 277-280, (2013). [4] A. Ustione, A. Cricenti, F. Bonfigli, F. Flora, A. Lai, T. Marolo, R.M. Montereali, G. Baldacchini, A. Faenov, T. Pikuz, L. Reale, Appl. Phys. Lett. 88, 141107 (2006).I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
