We analyze and experimentally demonstrate the possibility of generating X-waves at microwave and millimeter-wave frequencies by means of a partially open radial parallel-plate waveguide antenna. The structure is azimuthally symmetric and fed in the center by means of a simple vertical coaxial probe, which excites a cylindrical leaky wave. Radially periodic annular slots etched in the upper metal plate allow the propagation of a backward leaky wave, as required for generating Bessel beams in the near-field region. Since X-waves are polychromatic superpositions of Bessel beams, the wavenumber frequency dispersion of the relevant leaky mode is accounted for by the antenna design. In particular, a dispersion-engineering approach is used to properly select the operating fractional bandwidth for the antenna. Even if the beneficial effect of a large bandwidth is partially neutralized by the dispersive character of the resulting pulse, this being more prominent as the bandwidth increases, the experimental results demonstrate the capability of this simple planar design of generating X-waves in the microwave regime. The antenna can be of interest for the design of next-generation medical imaging devices, for non-destructive evaluations, as well as for wideband near-field secure communications and wireless power transfer systems at microwaves and millimeter waves.

Comite, D., Fuscaldo, W., Podilchak, S.K., Gómez-Guillamón Buendía, V., Hilario Re, P.D., Baccarelli, P., et al. (2018). Microwave generation of X-waves by means of a planar leaky-wave antenna. APPLIED PHYSICS LETTERS, 113(14), 1441021-1441025 [10.1063/1.5047397].

Microwave generation of X-waves by means of a planar leaky-wave antenna

Comite, D.;Baccarelli, P.;Galli, A.
2018-01-01

Abstract

We analyze and experimentally demonstrate the possibility of generating X-waves at microwave and millimeter-wave frequencies by means of a partially open radial parallel-plate waveguide antenna. The structure is azimuthally symmetric and fed in the center by means of a simple vertical coaxial probe, which excites a cylindrical leaky wave. Radially periodic annular slots etched in the upper metal plate allow the propagation of a backward leaky wave, as required for generating Bessel beams in the near-field region. Since X-waves are polychromatic superpositions of Bessel beams, the wavenumber frequency dispersion of the relevant leaky mode is accounted for by the antenna design. In particular, a dispersion-engineering approach is used to properly select the operating fractional bandwidth for the antenna. Even if the beneficial effect of a large bandwidth is partially neutralized by the dispersive character of the resulting pulse, this being more prominent as the bandwidth increases, the experimental results demonstrate the capability of this simple planar design of generating X-waves in the microwave regime. The antenna can be of interest for the design of next-generation medical imaging devices, for non-destructive evaluations, as well as for wideband near-field secure communications and wireless power transfer systems at microwaves and millimeter waves.
2018
Comite, D., Fuscaldo, W., Podilchak, S.K., Gómez-Guillamón Buendía, V., Hilario Re, P.D., Baccarelli, P., et al. (2018). Microwave generation of X-waves by means of a planar leaky-wave antenna. APPLIED PHYSICS LETTERS, 113(14), 1441021-1441025 [10.1063/1.5047397].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11590/345559
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 18
  • ???jsp.display-item.citation.isi??? 16
social impact