Multifunctional optical nanomultilayers (NMs) are needed for a wide array of applications, ranging from optical windows to electronic screens. Since the individual material constituents in optical coatings are often selected only for their desirable optical properties, mechanical characterization of the optical nanomultilayers is typically limited. Here, AlN/SiO2, TiO2/SiO2, and AlN/Al2O3 nanomultilayers synthesized in non-optimized and optimized optical performance layer configurations are tested using microtensile, nanoindentation, and pillar splitting techniques to highlight the effects of optical optimization on mechanical performance. Trends within each type of test and across all deformation modes reveal that layer thickness, volume fraction, and interfacial crystallinity can be viewed as controlling features for optical and mechanical performance, although their correlation may vary. It was observed that both configurations of the AlN/Al2O3 NMs exhibit the highest mechanical performance across all three testing techniques with an average experimental transmittance of 93.8% for the optimized layer configuration. Overall, the results from this expanded view of mechanical properties in ceramic optical nanomultilayers suggest the possibility of tuning film characteristics for joint optimization of opto-mechanical nanomultilayered coatings.
White, D.E., Appleget, C.D., Rossi, E., Sebastiani, M., Hodge, A.M. (2023). The mechanical performance of optically tuned ceramic nanomultilayers. MATERIALS & DESIGN, 231, 112014 [10.1016/j.matdes.2023.112014].
The mechanical performance of optically tuned ceramic nanomultilayers
Rossi E.Investigation
;Sebastiani M.Writing – Review & Editing
;
2023-01-01
Abstract
Multifunctional optical nanomultilayers (NMs) are needed for a wide array of applications, ranging from optical windows to electronic screens. Since the individual material constituents in optical coatings are often selected only for their desirable optical properties, mechanical characterization of the optical nanomultilayers is typically limited. Here, AlN/SiO2, TiO2/SiO2, and AlN/Al2O3 nanomultilayers synthesized in non-optimized and optimized optical performance layer configurations are tested using microtensile, nanoindentation, and pillar splitting techniques to highlight the effects of optical optimization on mechanical performance. Trends within each type of test and across all deformation modes reveal that layer thickness, volume fraction, and interfacial crystallinity can be viewed as controlling features for optical and mechanical performance, although their correlation may vary. It was observed that both configurations of the AlN/Al2O3 NMs exhibit the highest mechanical performance across all three testing techniques with an average experimental transmittance of 93.8% for the optimized layer configuration. Overall, the results from this expanded view of mechanical properties in ceramic optical nanomultilayers suggest the possibility of tuning film characteristics for joint optimization of opto-mechanical nanomultilayered coatings.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
